| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Panstopump slurry pump parts consists wet parts, sealing parts, bearing assembly, pedestal and other parts.
In slurry pump, Wet Parts means the lining parts which contact with fluid media, usually it includes Impeller, volute liner, Casing, shaft, throat bush, wear plate, case, cover, stuffing box, lantern restrictor, cover plate bolt, throat bush, shaft sleeve, cover plate liner, frame plate liner...
Usually the pump parts are made of iron, steel, bronze, brass, aluminum, plastic etc. For Slurry pumps, they are normally made of High chrome alloy, Rubber, polyurethane, and ceramic. High chrome alloy and Rubber are now the main material for the slurry pumps. Recent years some companies are trying to make wet parts by ceramics and many data come from labs and mills show that the ceramic wet parts can work for a longer time than high chrome alloy.
For chrome alloy material, the common type is High chrome Alloy(27%Cr), it can be used from pH 5 to 12, and its hardness can be to HRC58, which is a very good choice for slurry handling and transport. But in some conditions, the pH may be lower than 5, then we try A49, it can be lower to pH 4, mostly used in FGD processing.
The Rubber material is widely used in fine slurry conditions and lower pH to 2. There are also many rubber materials for different conditions, such as R08, R26, R55, S02, etc.
And recently, Polyurethane material becomes popular in some conditions. It is good at handling corrosive and abrasive conditions.
Features:
1.centrifugal slurry pumps and spare parts can fully interchange with world famous brand .
2.These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurry.
3. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer elastomer elastomer casting liners and Impellers, which are all interchangeable within a common casting assembly.
4.Wear -resistant Metal Liner and Rubber Liner available
5.Seal Type: gland seal , expeller seal and mechanical seal
6.Can be installed in multistage series
7.Easy to maintenance
Product Materials:
| Basic Part No. | Material Code | Part Name |
| 001 | E62 | Adjusting Screw |
| 003 | G01 | Base |
| 005 | Bearing Assembly | |
| 011 | E62 | Clamp Washer |
| 013 | D20 | Cover Plate |
| 015 | E62 | Cover Plate Bolt |
| 017 | R26A | Cover Plate Liner |
| 018 | R26A | Cover Plate Liner (Half) |
| 024 | E62 | End Cover |
| 028 | G01 & A05 | Expeller |
| 029 | G01 & A05 | Expeller Ring |
| 029R | R08A | Expeller Ring (Rubber) |
| 032 | D20 | Frame Plate |
| 034 | E62 | Frame Plate Bolt |
| 036 | R26A | Frame Plate Liner |
| 039 | E63 | Frame Plate Stud |
| 041 | A05A,R26A | Frame Plate Liner Insert |
| 043 | R26A | Frame Plate Liner (Half) |
| 044 | K24 | Gland Assembly |
| 060 | R08A | Intake Joint |
| 062 | D70 | Labyrinth |
| 063 | K31 | Lantern Ring |
| 064 | S18 | Impeller O-Ring |
| 067 | E62 | Neck Ring |
| 070 | E05 | Shaft Key |
| 073 | E05 | Shaft |
| 075 | D20 | Shaft Sleeve |
| 076 | D20 | Shaft Sleeve (Long) |
| 078 | G01 | Stuffing Box |
| 081 | E02 | Keeper Plate |
| 083 | A05A,R26A | Throat Bush |
| 085 | E02 | Cotter |
| 090 | S10 | Lip Seal |
| 109 | S18 | Shaft O-Ring |
| 110 | A05A | Volute Liner |
| 111 | Q05 | Packing |
| 117 | E62 | Shaft Spacer |
| 118 | K31 | Lantern Restrictor |
| 118-1 | K24 | Lantern Restrictor(Low Flow) |
| 122 | R11A | Expeller Ring/Stuffing Box Seal |
| 124 | R08A | Volute Liner Seal |
| 125 | R08A | Volute Frame Seal |
| 132 | R08A | Discharge Joint Ring |
| 138 | E62 | Grease Cup Adaptor |
| 179 | C23 | Shaft Sleeve Spacer |
| 210 | S46 | Shaft O-Ring |
| 217 | S18 | Impeller O-Ring |
| 239 | C23 | Impeller Release Collar |
| 241 | K24 | Lip Seal Gland |
| 302 | E02 | Lifting Tube |
| 303 | E02 | Locating Nut |
| 304 | E02 | Volute Lifting Beam |
| 306 | E02 | Shaft Wrench |
| 310 | E02 | Stuffing Box / Expeller Ring |
| 425 | R08A | Dyna Seal |
| 430 | U14 | Nut Covers |
| 005 | Bearing Assembly | |
| 019 | E02 | Mounting Plate |
| 041 | A05A | Back Liner |
| 064 | S18 | Impeller O-Ring |
| 070 | E05 | Shaft Key |
| 092 | A05A | Casing |
| 102 | E02 | Column |
| 116-1 | R10A | Strainer - Upper (Rubber) |
| 116-2 | G01 | Strainer-Upper (Cast Iron) |
| 116-3 | U02A | Strainer-Upper(Urethane) |
| 116-4 | C23 | Strainer-Upper(SS Mesh) |
| 116L | U01A | Strainer-Lower |
| 125 | R08A | Back Liner Seal |
| 154 | E02 | Discharge Pipe |
| 204 | R00 | Discharge Pipe Gasket |
| 231 | E02 | Suction Pipe |
| 290 | E02 | Spacer |
| 293 | E02 | Discharge Pipe Support |
| 306 | E02 | Shaft Wrench |
| 430 | U04A | Nut Covers |
| 005 | HT | Bearing Assembly |
| 019 | Metal | Mounting Plate |
| 041 | High Chrome or Elastomer | Back Liner |
| 064 | S10 | Impeller O Ring |
| 070 | Shaft Key | |
| 092 | G01 D20 | Casing |
| 102 | G01 | Column |
| 116 | G01 | Strainer-Upper |
| 116L | G01 | Strainer-Lower |
| 153 | G01 | Column Clamp |
Product Diagram:
Main Slurry Pump Parts:
Main Slurry Pump Parts : Impeller , Volute Liner , Casing , ThroatBush, Frame Plate Liner Insert , Cover Plate , Frame Plate, Pump Liner Expeller , Expeller Ring ,Stuffing Box , Expeller , Pump Shaft , shaft sleeve, Shaft Spacer, Bearing Assembly , Base, Stuffing Box, Gland Assembly, Bearing Housing , Lantern Ring , pump discharge pipe , flange , and so on.
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Hard metal and molded rubber impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer
seal rings back all liner joints.
• Throat Bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Certificates
Company Profile
At present our products involve more than a dozen series and more than 100 varleties. The main products are horizontal slurry pumps, vertical slurry pumps, rubber lined pumps, gravel pumps, froth pumps, desulfurization pumps, filter press feed pumps, dredge pumps, sewage pumps, submersible slurry pumps and spare parts. The compamy has a number of high-quality, high-level and experienced technical and management elites. The material can be adjusted according to the actual working conditions of customers, So as to improve the wear resistance and corrosion resistance of the pump and greatly prolong the service life of the pump. Our products are widely used in beneficiation, metallurgy coal,electric power, petroleum, chemical industry, sand excavation, urban sewage, environmental protection and other industries.
Workshop
Product Accessories
Application
Product Transportation
FAQ
){kind=link}