Single Suction High Efficiency Wear Resistant Charge Pump for Wastewater

Product Description

ZJE-II Series Slurry Pump

Product Introduction
 

ZJE-II series slurry pump is a special performance of impurities pump. In recent years, it has been called "special feed pump for filter press" by insiders. The pump suction slurry from the back side, simple packing seal without leakage, more importantly, its flow, head curve is very steep, very suitable for some special conditions. It is characterized by large feed flow and low pressure; Late pressing flow is small, high pressure; Shaft seal is simple and reliable, no water injection, no mechanical seal, no leakage; Pressure filter into the material without frequency control, high conveying concentration; Hydraulic design, structural design advanced novel, high efficiency, corrosion resistance, stable and reliable operation.

The pump is a pressure-in suction pump with a small suction range. It is recommended that the feeding liquid level be higher than the center of the pump. The diameter of the inlet and outlet pipe is generally the same as the inlet and outlet diameter of the pump or slightly larger, so the liquid concentration is mostly higher, so the inlet pipe of the pump should not be too long, so as not to affect the suction.

Detailed Photos

 

Product Parameters

Technical Parameters

Product Model	Rotational speed (r/min)	Flow (m³/h)	Head (m)	Shaft Power	TYPE	Power (KW)
50ZJE-II	1480	30 40 50 58 70	76 72.2 66.1 56 43.5	15	Y180L-4	22
					Y200L-4	30
65ZJE-II	1480	41.4 55.2 59 80 100	76 72.2 66.1 56 43.5	22.3	Y200L-4	30
					Y225S-4	37
80ZJE-II	1480	60 80 100 115 135	76 72.2 66.1 56 43.5	32	Y225S-4	37
					Y225M-4	45
100ZJE-II	1480	85 113 150 169 175	73.3 69 62.5 51.2 44	49	Y225M-4	45
					Y250M-4	55
125ZJE-II	1480	105 140 186 245 265	73.5 71.6 68.6 61.9 48.5	62.5	Y280S-4	75
					Y280M-4	90
125ZJE-II	1480	119 159 211 279 305	80.0 78.0 74.8 67.5 52.9	78.2	Y280S-4	75
					Y280M-4	90
125ZJE-II	1480	87 116 154 203 215	91.8 89.1 85.7 77.3 60.6	64.7	Y280S-4	75
					Y280M-4	90
50SYA60-15	1480	15-40	30-60	11.2	Y160L-4	15
50SYA65-18.5	1480	20-70	30-65	15.8	Y180L-4	18.5
50SYA80-22	1480	20-70	35-80	18.3	Y180L-4	22
65SYA76-37	1480	20-100	30-76	34.5	Y225S-4	37
65SYA80-45	1480	35-125	35-80	39.8	Y225M-4	45
65SYA100-55	1480	35-125	50-100	48.7	Y250M-4	55
80SYA75-55	1480	50-160	35-75	46.8	Y250M-4	55
80SYA100-90	1480	50-160	50-100	72.8	Y280M-4	90

Product Diagram

Certifications

Certificates
 

 

Company Profile

Company Profile
 

At present our products involve more than a dozen series and more than 100 varleties. The main products are horizontal slurry pumps, vertical slurry pumps, rubber lined pumps, gravel pumps, froth pumps, desulfurization pumps, filter press feed pumps, dredge pumps, sewage pumps, submersible slurry pumps and spare parts. The compamy has a number of high-quality, high-level and experienced technical and management elites. The material can be adjusted according to the actual working conditions of customers, So as to improve the wear resistance and corrosion resistance of the pump and greatly prolong the service life of the pump. Our products are widely used in beneficiation, metallurgy coal,electric power, petroleum, chemical industry, sand excavation, urban sewage, environmental protection and other industries.

Workshop

WorksWorkshophop

Worksho

Workshop

Product Accessories



Application



Product Transportation

 

FAQ

FAQ
 

1. What Products does Pansto Pump mainly produce?

Pansot mainly produce horizontal slurry pumps, vertical slurry pumps, rubber lined pumps, gravel sand pumps, froth pumps, desulfurization pumps, filter press feed pumps, dredge pumps, sewage pumps, submersible slurry pumps and spare parts.  

2. Is Pansto direct factory or trader?

Yes, Pansto is direct Slurry Pump Manufacturer with Export and Import License, having its own foundry workshop, Machining Workshop, Heat treatment equipment and Assembly workshop, also advanced quality inspection equipment. 
 
3. Can you provide OEM, ODM service?

Yes. OEM Service is an important part of our business. Pansto Pump  accept OEM business as samples or drawings of all kinds of pumps and casting spare parts. And more we offer ODM service too.

4. What is your warranty period?

We provide one year of unconditional warranty on our products for the manufacturing defects.

5. What about delivery time?

Normally our production time is within two weeks. Please confirm before order.

6. The Min MQQ?

The MQQ is one pcs pump or spare parts.


Welcome to Contact Us!