Abrasion Resistant Vertical Froth Pump for Gypsum Slurry Circulation

• After-sales Service: Yes
• Warranty: 1 Year
• Max.Head: 10-30m
• Max.Capacity: 23-78m3/H
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Model NO.: PPM Series
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Open
• Usage: Pump, Pumps, Slurry Pump, Circulating Pump
• Application: Mining Industry, Dredging Sand, Dredging Slurry
• Sealing: Mechanical Seal, Packing Seal, Auxiliary Impeller
• Material: High Chrome Alloy, Cast Iron, Rubber
• Drive Type: V-Belt,,Elastic Coupling, Gear Reducer,Fluid Coupl
• Lubrication: Grease or Oil
• Transport Package: Export Standard Wooden Box
• Specification: CE, SGS, ISO9001, ISO14001, ISO45001
• Trademark: Pansto
• Origin: China
• HS Code: 8413909990
• Production Capacity: 5000 PCS/Month

Product Description

PPM Series Slurry Pump

Product Introduction

     

PPM series froth pump is a new generation of product developed by our factory on the basis of absorbing and assimilating advanced technology at home and abroad. It is widely used in metallurgy, mining, coal, chemical, and other industrial sectors. Suitable for transporting abrasive or corrosive slurry containing foam, this series of pumps can effectively eliminate foam in the slurry during operation. It can still work normally in the case of insufficient incoming material, especially suitable for various flotation processes, and is an ideal product for transporting foam slurry.

PPM series pumps are simple in structure, highly versatile, and easy to install and use. The structural features are as follows:

1. This type of pump is used in PV and PV(J) bearing assembly. The bearing housing is equipped with a motor base or a motor frame, which can be directly driven or indirectly driven. The pulley can be easily replaced to change the pump speed to meet on-site condition changes.
2. The container material is made of steel structure or stainless steel, steel-lined rubber, and etc. The pump is equipped with a tangential inlet and an overflow box. The overflow box can conveniently send the excess incoming material back to the material pool. The tangential inlet can make the material quickly into the pump and eliminate some of the foam.
3. The structure of the pump is a double-plate structure. According to the different conveying media, the wet parts can be made of metal, rubber, or other non-metallic materials.

Detailed Photos

 

 

Product Parameters

Technical Parameters

Model	Clear water performance
	Max. motor allowed	Flow Q(m³/h)	Head H(m)	Rotational speed n(r/min)	Max.Eff.(%)	Diameter of suction port(mm)	Diameter of Spout(mm)
50PPM	3-15	6-43	6-30	800-1800	45	100	50
75PPM	3-18.5	23-78	5-28	700-1500	55	150	75
100PPM	5.5-37	33-187	5-28	500-1050	55	150	100
150PPM	15-75	80-393	5-25	250-680	55	200	150
200PPM	37-110	126-575	5-26	350-650	55	250	200

 

Product Diagram

Certifications

Certificates
 

 

Company Profile

Company Profile
 

At present our products involve more than a dozen series and more than 100 varleties. The main products are horizontal slurry pumps, vertical slurry pumps, rubber lined pumps, gravel pumps, froth pumps, desulfurization pumps, filter press feed pumps, dredge pumps, sewage pumps, submersible slurry pumps and spare parts. The compamy has a number of high-quality, high-level and experienced technical and management elites. The material can be adjusted according to the actual working conditions of customers, So as to improve the wear resistance and corrosion resistance of the pump and greatly prolong the service life of the pump. Our products are widely used in beneficiation, metallurgy coal,electric power, petroleum, chemical industry, sand excavation, urban sewage, environmental protection and other industries.

Workshop

WorksWorkshophop

Worksho

Workshop

 

Product Accessories



Application



Product Transportation

 

FAQ

FAQ
 

1. What Products does Pansto Pump mainly produce?

Pansot mainly produce horizontal slurry pumps, vertical slurry pumps, rubber lined pumps, gravel sand pumps, froth pumps, desulfurization pumps, filter press feed pumps, dredge pumps, sewage pumps, submersible slurry pumps and spare parts.  

2. Is Pansto direct factory or trader?

Yes, Pansto is direct Slurry Pump Manufacturer with Export and Import License, having its own foundry workshop, Machining Workshop, Heat treatment equipment and Assembly workshop, also advanced quality inspection equipment. 
 
3. Can you provide OEM, ODM service?

Yes. OEM Service is an important part of our business. Pansto Pump  accept OEM business as samples or drawings of all kinds of pumps and casting spare parts. And more we offer ODM service too.

4. What is your warranty period?

We provide one year of unconditional warranty on our products for the manufacturing defects.

5. What about delivery time?

Normally our production time is within two weeks. Please confirm before order.

6. The Min MQQ?

The MQQ is one pcs pump or spare parts.


Welcome to Contact Us!